Cut on the fly
It cuts while the material is still feeding, at up to 1000 mm/s on the L1810 and 1500 mm/s on the L3214.
Summa L Series · UK Sales and Service Partner
Summa L Series laser cutters
Laser cutting for textile production, with sealed edges, consistent geometry and continuous high-speed cutting.
Two models: a compact table for precise textile work, and a wide-format system for volume.
What it is for
A sealed edge, without a knife.
A laser seals synthetic fabric as it cuts, so edges do not fray and there is no blade to wear. Where that matters, laser cutting is worth costing against a knife.
Vision system
Cameras read registration marks, outlines or barcodes so the cut follows the print. Optional on the L1810, standard on the L3214.
Built to be safe
Class 1 safety, with the laser source covered and fumes extracted. GoProduce Laser Edition runs barcode workflows.
Summa's own film. Nothing loads from YouTube until you press play. Watch it on YouTube instead if you prefer.
Models
Two models.
The difference is the working area, the laser power and the volume you run.
L1810
Working area 1820 × 920 mm
Compact and precise, for textiles such as sportswear and dye sublimation garments, and composite raw materials.
L3214
Working area 3300 × 1400 mm
For wide-format soft signage at volume, cutting on the fly so finished pieces come off the table ready.
Full specifications. Summa’s L Series brochure covers both models and their configurations. Ranges, configurations and specifications may change; we confirm the current machine and tooling in any recommendation or quotation.
Download the Summa L Series brochurePDF, 11 MBApplications
Where it is used.
A guide to where the L Series usually fits. Fabric, print process and volume decide the model, which a test cut confirms.
- Soft signage and SEGTension fabric frames and printed textile displays.
- Sportswear and apparelDye sublimation garments and team kit.
- Technical textilesIndustrial and filtration fabrics.
- Automotive interiorsTextile components for vehicle interiors.
- Interior decorationPrinted textiles for interiors.
- Composite materialsRaw materials used in composite production.
Summa through Dennison
One UK partner, from first cut to service.
Dennison is Summa UK Sales and Service Partner. The engineers who help you choose the machine are the engineers who install and look after it.
Application advice
The machine, modules and tooling specified around the material you cut and the output you need.
A test cut first
Your own material on a working Summa in West Yorkshire, before a decision is made.
Installation and training
Commissioning on your site by Dennison engineers, and operators trained on your own jobs.
Service for its working life
Planned maintenance, breakdown support, parts and technical help from the UK partner that installed it.
Talk to us about the L Series.
Send us the fabric and the print, and we will tell you whether a laser is the right answer and which model fits.
Summa, F Series Vantage, V Series, S Series and L Series are trade marks of Summa NV. Dennison G.E.S Ltd is Summa UK Sales and Service Partner. Product photographs are Summa NV’s own. Product information is based on Summa NV’s published literature and may change; Dennison confirms current specifications in any quotation. View complete manufacturer information on the Summa website.